Mieliteko Home Improvement

Worried put lights on the wet areas, like the bathroom? No need anymore. Now there are lights specially made for this area.

Adjust the lighting for areas that are often exposed to splashes of water, is often inconvenient. The reason was at risk if we need to put the lights in this area. Spray can make a lamp is broken, and dangerous for the health and safety.

Contemporary electronic Telkonologi allows all things related to the lighting arrangement in the bathroom can be realized safely. Now been circulated in the market, type of lamp that includes protection against water splashes and dust.

Actually the lights are not much different from the lights in general. Both types of lights and designs. You are still treated with a range of design options are beautiful, unique, and even luxury. The difference lies in the protection it has, against dust and splash water. Protection was marked by the Index of Protection (IP) of dust and water (index of protection against dust and water).

IP consists of a row of two numbers. The figures show the level of protection provided against an object, from external interference. The first number indicates protection against dust and other solids. While the second number indicates protection against liquids.

Well, the lights for wet areas usually have a 54 IP numbers. Point 5 means the lights are protected from dust. Figures 4 is light shielded from water spray from all directions. With such protection, no longer need to worry about putting lights in the wet areas. Sink or shower area can also lighted.

Although energy-saving lamp Much Electricity Use
All would agree that the atmosphere of gloom can make sleep more soundly. But, that does not mean we should just put on a light. In fact, we actually can save energy with lots of lights.

Adjust the lighting for the bedroom is tricky. Given the requirements, it would sound so easy. All it takes is building a dim atmosphere. That is, the light used should not be too bright, and should be creamy.

Structuring of light did not stop at the choice of color and light. Placement also affects light. Lighting made much better hidden than with direct lighting, although both have shades of color and the same intensity.

This placement problem has nothing to do also with the number of lights installed. Based on the theory, the light in the room should not be too bright. But, that does not mean putting one lamp is the right choice.

Better, you break the light point to several places by using lamps with smaller wattage. This is far more efficient than by installing a bright light in the middle of the ceiling. In addition to more equitable distribution of light, the energy saved could be used.

Way, by making a separate switch for each lamp group. See example in this bedroom. Here, the lighting was divided into three: indirect light on one side of the wall, the general lighting in the middle of the room, and downlights in the bed that serves as a reading lamp.

In the light of the conditions require, for example, when working, all lights can be turned on. Conversely, when sleeping, just turn on his light hidden it. More efficient energy, sleep more soundly. Who would not want?

Bathing in a room that is too bright or too dark, certainly not comfortable. That’s why, even the lighting plan needs to be done.

Lighting in the bathroom as important as the lighting in other rooms. Utilization of natural light during the day is recommended. Sunlight, in addition to acting as light, also from the bathroom to avoid damp, fungi, and bacteria. Let the sunlight in through openings sufficient.

Opening in the bathroom can be a glass window in the wall, or roof (skylights). Moreover, it can also be used jalousie screen on the wall or roof, too. Of course when they want to make a glass window on the roof and walls, you need to consider its placement. If only the future placement of windows disturbing privacy, can be added to use window blinds as window shades, for bathroom use. Afterward, open the window blind, so the sun returned freely entered.

At night, it was time to maximize the artificial lighting of the bathroom lights. Structuring the lights were not vain. There are certain areas, which require more lighting. Artificial lighting in the bathroom is very influenced by the activities in it. Many people use the bathroom, not only for bathing. Dress up even reading can be done in this room. So prepare adequate lighting for each activity.

Some areas such as shower and sink area, usually require more light. Note also its placement. Sink area is usually equipped with a mirror. Activity toothbrush, wash, to dress up done here. For the mirror area, well placed lights on the left and right. To be precise direction of light falling on her face. In the shower or tub area can use a wall lamp or lamps attached to the ceiling.

In placing the lights in the wet areas, caution is needed. If possible select a lamp that has protection from water splashes and dust. In a small bathroom, where a bath is the only activity, the lights in the ceiling could be enough. Origin of light sufficient to illuminate every part of the shower room.

The room lights also function to Change Mood
The lighting can change the atmosphere of space. Glow could be an accent color, can even affect one’s mood. Yellow bias can create a warm atmosphere.

In the interior layout, color and light are inseparable. Cohesiveness both will make the room feel more “alive”. Gradations of color and shadow effects for example, will work to make the room look more beautiful.

Interesting examples of color and light alloys, can be seen in the living room area is 9.2 square meters. As I sat in it, we’ll feel the warmth of the atmosphere, which is created from the use of color and light yellow berbias. Even we were treated to the unique shades on the walls.

Many interesting things can we talk about here. First, insulation made of brick covered with cement. This screen-finishing in orange paint. Dilabur wood-framed dark brown color, with color matching two chairs and coffee table. If the insulation biased light, yellow light to make the color more pronounced.

Shifted slightly to the wall brown. Anything interesting in there. There coakan (niche) 80cmx60cm size, which is used as a place to put the artistic lamps. On the inside of this niche myself fitted two spotlights. The light fall on the artistic lamps, to confirm the details pretty. The combination wall color, lighting displays, and the bias light, making the wall look nice.

There are still interesting in the other corner. Note the elliptical bedside table is made of acrylic. The existence of an ornament of roots inside the table makes the table catchy. Coupled with a light mounted on the inside of the table. Result, the room was far from the impression of monotonous and boring.

Diamater base 11 cm
Height 28 cm
Textured plastic pipe materials
Color Offwhite
This lamp is formed of plastic pipe engraved with motifs sepiral, consists of 3 pipes with different diameters. Associated with each brand Lexan polycarbonat transparent color.
This lamp is designed for the bedroom so enough with Bolam 15 watts or less.
These lamps can be produced in large amounts depending on demand.